product summarize:
TiNet S6808 is a cabinet modularized and high-performed router switch for IP MAN (metropolitan area network), large-scaled enterprise network and campus network. It provides high performance, high port density and high flexibility..
TiNet S6808 adopts Crossbar switching network and focuses on constructing an end-to-end network featuring low cost, high performance. It provides 10 slots, 8 of which are service slots. The administration module, power module, and fan module support redundant back-up. The power supply of both alternating current (AC) and direct current (DC) are supported. Card, power and fan can be hot-swappabled. TiNet S6808 can provide super high-speed links for MAN, campus networks and data centers based on the 10G IPv4/IPv6 platform, It can also provide rich service functions, such as VPN/NAT/Firewall and Load Balance solution, a powerful QoS guarantee, complete security management mechanism and high level carrier-class reliability, designed to fully satisfy the requirements of high-end users for multiple services.
Main Characteristics:
Advanced Architecture
S6808 10G Core Routing Switch adopts distributed system architecture designs and high performed ASIC chips to process service, as well the Crossbar technologies for packet switching. It has the capability of full-wire-speed service processing and stable upgrading switching. The switching capability can be stable upgraded to 1.2 Tbps. Distributing Crossbar switching network converges to 1+1 back-up main control board connected by high-speed backplane to realize the redundant hot back-up of dual-main control and dual-switching network, which greatly improved system reliability.
High Capacity and High-Density
S6808 series can provide 1.2Tbps backplane bandwidth and 10 slots which can be configured to be redundant hot back-up working mode of 2 administrating modules and 8 service modules. 1.2Tbps switching capacity to support maximal 384 GE ports or 64 10GE ports totally. Ideal for powerful hardware platform upgrade capabilities, the S6808 series has reserved a large number of bus interfaces on the backplane for future system expansion. The system switching capacity can be smoothly expanded to terabits to meet the ever-increasing bandwidth needs and user investment protection.
Carrier-Class Reliability Design
S6808 series adopts distributed processing structure to support dual main control switching units with all interface modules and power supply modules hot-swappable and passive backplane design. The power system has dual power inputs following the 1+1 redundant hot back-up mechanism. All the reliability designs ensure the system to meet strict requirements for carrier-class network reliability (up to 99.999%).
10 Gigabit Wire-speed Interfaces Support
S6808 series symbolizes the 10GE network practices by providing powerful QoS guarantee, rich services features such as ACL, strategic routing and security, wire-speed IPv4/IPv6 forwarding, IP VPN services and transparent LAN services.
Abundant QoS Mechanism
S6808 supports completed IPv4/IPv6 Diff-Serv/QoS, and granularity can be fined to 8Kbps. It also supports DSCP, IP, TOS priority and remark function of COS priority, and supports message redirection to configure message transmiting path according to the flow of network and also support SP, WRR, SP+WRR queue scheduler mechanism, and port mirroring, flow mirroring, and flow statistics, etc.
CompleteSecurity Mechanism
S6808 provides abundant monitor and network management to realize the monitor on task exeption, memory exeption, switching chips exeption and CPU utilization, stack exeption, etc. And Syslog can note logs which can be noted to NVRAM, FLASH, RAM, Telnet, SSH Console and Syslog servers. S6808 supports configuration security to authenticate logging in user, and user with different level can be configured different priority, and Telnet logging in password mechanism of ip address can also be configured; it also supports message safety filter to prevent illegal intrusion and malicious message attacking. It supports IEEE802.1x, AAA/Radius to authenticate user’s identification. S6808 supports port reliable configuration to inspect illegal DHCP Server and Radius Server and allow them to be accessed to reliable ports to guarantee network security.
Specification:
|
Attributes |
S6808 |
|
Switching capacity |
1.28Tbps |
|
Backplane capacity |
>1.6Tbps |
|
Throughout (IPv4/IPv6) |
952Mpps |
|
Number of slots |
10 |
|
Number of service slots |
8 |
|
Redundancy |
Power supply 2+1 redundancy, fan 2+1 redundancy, switching and master 1+1 redundancy |
|
Number of service ports |
maximum 384 10/100BASE-T
maximum 384 10/100/1000BASE-T
maximum 3841000Base-SX
maximum 3841000Base-LX
maximum 64 10GE |
|
Modules |
MRS-PWR-B1-AC 220V AC power supply module (600W)
MRS-PWR-B1-DC -48V DC power supply module (600W)
S6808-MI Switching and managing board, NGCoreEngine™I 720Gbps
S6808-12GT 12*10/100/1000Base-T interface board
S6808-12GB 12*1000Base-X interface board
S6808-4GX24TX 24*10/100Base-T, 4*1000BASE-X, 4*10/100/1000Base-T(combo) interface board
S6808-8GX16GB 24*1000BASE-X, 8*10/100/1000Base-T(combo)
S6808-12GX12GT 24*10/100/1000Base-T,12* 1000BASE-X (Combo) interface board
S6808-2XFP8GX16GB 2*10GE XFP,24*1000BASE-X,8* 10/100/1000Base-T(combo) interface board
S6808-2XFP12GX12GT 2*10GE XFP,24*10/100/1000Base-T,12* 1000BASE-X (Combo) interface board
S6808-ES-2GB Enhanced SPM (service processing module). IPv6 and MPLS based on hardware which need corresponded function permit configuration
LIC-S6808-ES-IPv6 Enhanced SPM (service processing module). IPv6 hardware function permits(necessary when configuring IPv6) |
|
Environment
|
Working temperature：0°C～40°C
Storage temperature：-40°C～70°C
Relative humidity：10%～90%，no condensing |
|
Input voltage
|
AC：Input 90～260V，50～60Hz；
DC：Input -36V～-72V； |
|
Maximum System Power Consumption |
≤600W |
|
Dimensions
(W*D*H) |
436mm×797mm×478mm |
|
Weight (in maximum
configuration) |
65kg |
Service Features:
|
Attributes |
S6808 |
|
MAC Address |
Support 64K MAC address
Support MAC address Black Hole
Support MAC address Port Limit |
|
VLAN |
Support 4K VLAN entry
Support Port-based/MAC-based/IP subnet-based VLAN
Support port-based QinQ and Selective QinQ(Stack VLAN)
Support VLAN Swap and VLAN Remark |
|
Jumbo Frame |
≥9Kbytes |
|
IP Routing |
256K IPv4/IPv6 network route，128K IPv4/IPv6 host route |
|
L2 Function |
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3z 1000BASE-X
IEEE802.3ab 1000Base-T
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1d Spanning Trees(STP)
IEEE 802.1s Multiple Spanning Trees(MSTP)
IEEE 802.1w Rapid Reconfiguration of Spanning Tree(RSTP)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
GVRP、PVLAN、Super VLAN、Stack VLAN、Port Mirroring、Port Isolation
Broadcast/multicast/unknown unicast suppression based on port rate-limiting and PPS |
|
IPv4 Routing |
IP/IPX
RIPv2、RIP-2 MD5 Authentication
OSPFv2、OSPF NSSA、OSPF Database Overflow
BGP4、IS-IS
LPM Routing、Policy-based Routing(PBR)、ECMP、WCMP
IGMP v1/v2/v3、DVMRP、PIM-DM、PIM-SM、PIM-SSM、MSDP、MBGP
ARP、ARP Proxy
DHCP Server、DHCP Relay
VRRP(Virtual Router Redundancy Protocol) |
|
IPv6 Routing |
ICMPv6、ND
RIPng、OSPFv3、IS-ISv6、BGP(Border Gateway Protocol)4+
PIM-SM/DM、 MLDv1/v2
6to4 Tunnels、configured Tunnels 、ISATAP |
|
Multicast |
Multicast of L3：IGMP v1/v2/v3、PIM-DMv4/v6、PIM-SMv4/v6
Multicast of L2：1K multicast group、RFC1112 IGMPv1、RFC 2236 IGMPv2、RFC 3376 IGMPv3、MLDv2/MLDv2 Snooping、IGMP Filter、IGMP Fast leave、controllable multicast、cross-VLAN multicast copy，1K L2 multicast group |
|
ACL/QoS |
Support standard and extended ACL，activated at most 2K～6K flow rules simultaneity
Support Time Range-based ACL
Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame
Support packet filtration of L2～L7 even deep to 80 bytes of IP packet head
Support rate-limiting to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow
Packet tagging based on 802.1p or DSCP preference
Support CAR(Committed Access Rate)、Traffic Shaping and flow statistics
Support packet mirroring and redirection of interface and self-defined flow
Support Port-based super queue scheduler and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP(Strict Priority) and WRR(Weighted Round Robin).
Support Congestion Avoidance Algorithm，including Tail-Drop and WRED |
|
Security |
Support IEEE 802.1x and AAA/Radius authentication
Support IP+MAC+Port+VLAN ID binding
Support port trusted illegal DHCP Server and Radius Server detection
Support plaintext authentication of OSPF(Open Shortest Path First)、RIPv2 and BGPv4 packets and MD5 cryptograph authentication
Support RFC3176 sFlow flow analysis to realize Protocol-based and address-based flow monitor and statistics
Support broadcast storm suppression
Support ACL flow filtration mechanism
Support URPF to prevent IP address counterfeit and attack
Support anti-DOS attack(such as ARP，Synflood，Smurf，ICMP attack)、ARP detection、worm and Msblaster worm attack
Support data log and RFC 3164 BSD syslog Protocol
Support SSHv2 Secure Shell
Support Security IP login through Telnet
Support hierarchical management and password protection of users |
|
Reliability |
Support host/line load balance of VRRP(Virtual Router Redundancy Protocol) and LACP(Link Aggregation Control Protocol)
Support double fault tolerance of host program and configuration files
Support master/slave shift and all board cards support hot-swappable
multiplex (2+1) power system to supply power and power consumption load balance |
|
Management and maintenance |
Support command-line interface（CLI）, Console, Telnet and WEB configuration
Support System configuration with SNMPv1/v2/v3
Support RMON (Remote Monitoring)1/2/3/9 groups of MIB
Support GN.LinkⅡ Server
Support NGBNView network management
Support WEB-based network management
Support hardware abnormal auto-detection and alarm on task, memory, CPU utilization, stack, switching chips and board temperature
Support Ping and Traceroute
Support VCT(Virtual Cable Test )
Support system log/alarm/debug information output
Support Loopback-detection on ports |